- SELECTED VERSION (Small Diamond Blade)
- DEMON SERIALS (Small Diamond Blade)
- BLACK SERIES (Small Diamond Blade)
- DIAMOND VACUUM BRAZED DISC (3"/4")
- UNIVERSAL DIAMOND BLADE (5''/6''/7''/9''/12")
- ASPHALT CUTTING BLADE (12"/14")
- WALK BEHIND SAW BLADE (16"/18"/20"/24"/26"/28")
- TUCK POINT/CRACK CHASER (4'',14'')
- GC STONE GRINDING DISC
- PLATING DIAMOND GRINDING & CUTTING DISC
- FLAP WHEEL FOR GLASS AND STONE
- CUP WHEEL (4"/5"/7"/9"/10")
- SPUN PILE LASER BLADE (7",9'',12'',14'',16")
- REINFORCE CONCRETE LASER BLADE (14'',16'')
- WALL SAW BLADE (600mm-1400mm)
- DIAMOND WIRE SAW
- NAIL CUTTING BLADE (4'',7'',9'')
- ALUMINIUM CUTTING BLADE (For Aluminium)
- WOOD CUTTING BLADE (For Wood)
- SDS PLUS 4 CUT DRILL BIT
- HSS STEP DRILL
- XTREME PLUS DRILL BIT
- SDS MAX DRILL BIT
- BULL POINT AND CHISEL
- DIAMOND STONE BIT
- TCT ANNULAR CUTTER
- DRY CORE BIT
- CORING MACHINES
- 1 PIECE TYPE CONSTRUCTION CORE BIT
- 3 PIECE TYPE CONSTRUCTION CORE BIT
- OPTIONAL ACCESSORIES
- 11" METAL CUTTING MACHINE
- 10" FLOOR GRINDING MACHINES (250mm)
- 14" TABLE TILE SAW (300/350mm)
- ENHANCED VERSION CONCRETE VIBRATOR
- PORTABLE VIBRATOR MOTOR
- WATER COLLECTOR (127MM)
- DEMOLITION HAMMER GREASE
- DUST COVER COMPLETE C/W WATER PUMP
- SINGLE RAIL TILE CUTTER
- POWER TROWEL 1000MM
- SURFACE FINISHING SCREED
- TAMPING RAMMER
- PLATE COMPACTOR 500MM
- FLOOR SAW MACHINE FS500
- AUTOMATIC MAGNETIC DRILL
- 14" POWER CUTTER
AKODA RESOURCES
SDN BHD
24, Jalan Sierra 5, Pusat Komersial Sierra Maharani, (Muar By Pass) 84000 Muar, Johor, Malaysia.
+6010-933 8550 (Mr Allen)
DRY CORE BIT
Instruction
-Use machine rotary hammer SDS PLUS hammer drill more than 900 watt.
-Surer that the machine is in the drilling function do not work with hammer drill function, it will damage the bit.
-Use the machine at speed between 380-2500 rpm. For harder materials and larger core diameters, use a lower rpm. Higher speeds do not always improve performance.
-Use machine rotary hammer SDS PLUS hammer drill more than 900 watt.
-Surer that the machine is in the drilling function do not work with hammer drill function, it will damage the bit.
-Use the machine at speed between 380-2500 rpm. For harder materials and larger core diameters, use a lower rpm. Higher speeds do not always improve performance.